bose speaker brackets This is a topic that many people are looking for. militaria-agent.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, militaria-agent.com would like to introduce to you Bose UB-20 And 300 In-wall Speaker Mount. Following along are instructions in the video below:
“Noon boughs annual bracket system. Which means that instead of having your poles. You just just mounted on the wall with the bows original bracket. It will be hanging down or like this instead of that you would definitely have it mounted inside of the wall.
The only piece that you would be able to see just a fun and over here once you finish installing it but anyways over here. So this is a bracket so when you get it it looks exactly just like this right here. And it comes with some packing just stuck inside of it and also some bubble wrap wrapping around the dish to protect it from damages door interpretation and here over here these are the clips that s gonna clip it on the wall once you slide it in there and you re gonna receive like a two clips so there s one on this side and one here on the other side that the clips fit exactly inside of it so once you put the clip in there. And all you have to do once you re ready to put it back in the wall.
So that the back here is your template. So you d find exactly where your what you really want to put the speaker. Then you stick it against the wall. And so and now you use a crayon or pencil.
And then you draw around the back box. And this is the part that you cut up to the wall that drywall piece so after you cut. It then you just slide it in there to make sure that the bracket actually goes inside so if it doesn t if you need to make any adjustment. Then you just shave it off from there and then slide it inside of the wall after you do that next thing you do you go ahead and grab your the bow speaker and you take it so.
If you bought your bose. Speaker brand new. You would have some four millimeter screws. That comes with it.
And you would screw that screw right in there you screw..
It in there. Then this will hold the speaker. If you mount it in the ceiling and looking upside down. Then that will hold the speaker from falling off from the bracket.
If you mount oh no straight vertical wall. You don t necessarily have to have a school in the back of it you could just pull it out connect the wires and then slide it back in there then it ll say inside of the wall. And now for you to get the best sound as possible. I recommend just having insulation around the box just to prevent like any vibrations and things like that because these speakers tend to get really loud.
And it is important to have somewhat of an insulation around it normally when you install it in the ceiling. The ceiling usually have foam padding and or like the insulation that comes with the house when you bought it so that you know prevent any echoing within the walls and stuff like that so. This is pretty much how it looks like guys just to give you a simple overview. So it looks exactly like this when you put it so this is how much clearance.
You re gonna have of the speaker. That s taking that we did it just like that just because of marsh was about like a four inches thick from the front of the drywall to the back of the drywall. Which is the next one on the other side. It s about four inches.
And this right here extended about three inches. That s why you have this little left over here. We do it as so so it fits on any given in house wall including ceiling with little clearance and stuff like that so as long as you have three inches in there. Then you should definitely be able to fit right and obviously your wires connected through.
If you have them you speak your pre wired throughout the house. Then you would connect them they re there to come from the in wall and stuff like that then you ll be good and all you could just choose to do it. However. You want and this is our looks.
It s a pretty simple and this comes in white. Only if you want them in black. We have to pretty much as whenever you place your order you have to request that you want them to be made in black for your purpose and these are also when you call it tenable you can actually paint it to whatever helps color that you want so if you re in selling long is blue whatever then you pin it in blue. If it is in white or whatever color.
It is so i d recommend just take out the speaker first and then just go ahead and paint out the front layer only and then the inner sections right there so that way when you re sliding your speaker. In there everything outside. Here would look exactly as the wall. So it would look like this.
But the other thing that we did that was neat. We know that sometimes when you mount your speaker in the ceiling. You don t want the speaker to look straight down on the floor. If you re so far is right there and then your center speakers right there.
You don t want to look at straight down on the floor. You want to be able to tilt. It over to your sitting direction. So that way you can hear that sound clearer.
So we put just a little bit of clearance..
Which is barely you can barely see it that will just tip the tilt. The speaker. Roughly about 15 degree 15 degree then that will just tip tilt. It so you can hear the sound to your direction.
So if you re sitting down. It s on that as you can see the it s a slight tilt. Let me show you a corner. It s not so much where it s noticeable.
It s just a very slow tilt that way the speaker can point it to your direction. When you sit down rather than having it straight down looking at the floor. It has a little tilt on there that makes it looks directly at you so you can position the speaker. Either side to where that it pointed to the center center.
Table. So if my speaker just sitting on the corner over here just like that and in my senate. A chair sofa is right in the middle. Where my hand is right now.
All you have to do you mount it and then you press this on the side. You ll just tilt. It 15 degrees. Then now the sun will print directly to the center of the house and that way you get a much better clearer sound.
When you send up your home entertainment system..
And as you can see in the back. So it s tilted just enough to where the school is right now so once you tilt. It you d have to tighten the screw. So it doesn t move from that direction.
So this one is tilted on the on the right side right now so so. What is on the right side here and then if you want to tilt. It on the left you just move it like this then the school that you put in the back. You tighten.
It and then it ll keep the speaker tilt to the left side alright vice versa. So if you want to in the center. Just put it straight and then screw it in and i said then you ll be done so this is pretty much it guys. This is the new bows in wall bracket and i really hope that you guys enjoy this video.
And you like this new product. And i ll put the link down below to show you where to purchase it and it s ready to ship out to anybody who actually needs one because i know a lot of people have both speakers. They trying to get rid of it to get those in wall speaker system that costs a lot of money when they ve already spent 4000. On the bows and you definitely don t want to do that when bose is already a great system to begin with you just have to know how to calibrate your sound for it to sound.
Really good thank you again for watching. And i look forward to hear from you post your comment down below. If you love or like the product or anything else that ” ..
Thank you for watching all the articles on the topic Bose UB-20 And 300 In-wall Speaker Mount. All shares of militaria-agent.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.