samsung smt813 This is a topic that many people are looking for. militaria-agent.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, militaria-agent.com would like to introduce to you Samsung S2 SM-T813 screen removal / Charging port replacement – Handling Risky Repairs. Following along are instructions in the video below:
“The previous video. We spoke about handling risky repairs. We had a customer that brought brought in a galaxy tab s2. This is the t8 1 3.
Model. The charging was bad we verified that the charging port was bad because we looked at the port under the microscope. And the pins were all over the place. I have no way of knowing if the screen is good or not but i m gonna assume that the screen is good because the charging port does look bad so we gave the customer a price to change the charging port and the customer agreed now when we pride the back cover open.
We realized that in order to change the charge on board on this tablet. We have to pry it the front screen open what we did there was a plastic piece covering the charging board. We broke the plastic piece off in hopes that we can take the charging board out from here instead of having to remove it from the front. But we were not successful because part of the board is still stuck right here and in order to remove it we have to unscrew two screws from the front.
Which they are under the screen. So the bottom line. We have to remove the screen in order to unscrew two screws in the front then we can safely remove the charging board so the bottom line. We have to remove the screen in order to unscrew the two screws and replace the charging board on this tablet back then we put the tablet on hold and i told you that any time we are dealing with a risky repair.
We have to let the customer know because we do not want to be responsible for the screen should anything happen to it the screen can break the screen can crack or something may happen to the screen..
It s very thin and it s a very delicate repair it doesn t matter where you take this tablet. The risks are gonna be the same we have to heat up the edges and then we have to pry the screen open now we called the customer and we told them about the risks involved. We told him the tablet is not working anyway. It s paperweight anyway so you either take the risk and we can try to fix the charging board for you or you can just come and pick her up and it s not gonna work anyway.
And there s no guaranteed way to remove the screen without breaking it we re gonna do our best to remove the screen without breaking it we have done this a lot of times especially on the surface pro s so customer gave us the okay. And he said go ahead and do it if the screen breaks. Then we are not responsible for it so that gives us the peace of mind. And it makes us more comfortable working on this device knowing that should anything happen to the screen.
We are not responsible for it. But we re gonna do our best. I ll try my best my absolute best to remove the screen without breaking it so let s see how it s done all right. So.
What i will be doing is use a hot air gun. We use this gun for tablets. It generates good amount of heat. I do not use the hot air station.
That i that we have for soldering because of the small nozzle tips..
The nozzle on this one is fairly big. So i want this to be hot to the touch. That s when you know that that s enough heat. So i keep feeling the screen as i put it on the edges.
Okay. So it s hot to the touch. Now. Just do it few more times like so and now i slide.
The plastic card in now we have the plastic cord inside. So we re gonna try to work it it s a very thin piece of plastic cord. We re gonna try to work it back and forth slip back out okay so if we are a little bit patient. We can get the job done and if we feel like the court is getting stuck and it s not moving we can apply more heat right now.
I think i m okay so far so the middle part is good let me apply some more heat. I mean it doesn t matter how hard the glass gets in few seconds. It s gonna go back to being cold again so we constantly have to apply heat. So far.
We are doing good and the card is very thin..
That s a good thing because a thin cord is not going to break the glass. We do not want to go in too deep you may touch the lcd and possibly break it so just stay on the edges. Maybe i would say quarter inch. If we broke the screen then we re not going to get paid to fix the the charging board.
So we always try our best. Okay so far. We are doing good everything is going the richard. What happens if i fight the screen up now you can already see that the screen.
It s for one out. But we are still not done now one thing you have to understand is there is no fast way to do this you have to be patient do not use like hard plastic cards that s number one do not use like your metal trying to very bad and be super patient. I mean we re actually going fast here. We re not okay.
So this side is done and this site should be done also it s open just have to pry it from the bottom. And the cable should be connected on the left top side of the screen. Which is located right over here. And there s a piece of tape over it.
So that s good let s take that out and the screen is open now absolutely mint perfect condition behold good and that s the tape that was holding the screen to the frame and excellent condition so we were able to safely remove the screen customer is gonna be happy as for the charging port the charging board not port i keep confusing the charging board that we need to change is on the bottom here..
And the stock part that has two screws in the front is here so if we flip it we should find two screws here. Let me take the tape out so you can see it better. And these are the two screws that we need to unscrew in order to remove whatever is left of the board here. It s stupid how samsung made it that way they do not want you to fix it they just want you to go and buy new one why would you put screws under the screen.
I mean why couldn t you just put the charging board on the back and put screws that are visible from the back. I do not see any reason why screws should be under the screen that s crazy. But that s what we do here we make that impossible possible alright. So it s done the screen is out i do not have the charging board in stock.
So i m gonna go ahead and order one and i don t think i need to do another video on how to replace the charging board. Because it s fairly easy we take this two screws off from the from here. We take whatever is left from the charging board on the back. And then we replace the charging board and put the screen back on put the back cover on and call the customer.
So so that s it everything worked out great and success. ” ..
Thank you for watching all the articles on the topic Samsung S2 SM-T813 screen removal / Charging port replacement – Handling Risky Repairs. All shares of militaria-agent.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.